PRODUCTS / PARTS /  TEKNIKA CRANKS  |  TEKNIKA PEDALS  |  TEKNIKA STEMS

teknika cranks

7075 AL | CERAMIC | TITANIUM

These beauties are spec’d for success and come in 155-175mm. They’re CNC machined from 7075 aluminum and come with a 7075 30mm spindle and titanium pinch bolts. Available in custom Cerakote colors.

SEE A 3D PREVIEW

teknika cranks

7075 AL | CERAMIC | TITANIUM

These beauties are spec’d for success and come in 155-175mm. They’re CNC machined from 7075 aluminum and come with a 7075 30mm spindle and titanium pinch bolts. Available in custom Cerakote colors.

SEE A 3D PREVIEW

.

.

.

BEAUTIFUL, INNOVATIVE PRODUCT DESIGN

PATENT LEVEL INNOVATION

Every detail of each Teknika product is purpose driven to deliver new features that enhance performace and usability.

.

.

.

FULLY CNC MACHINED FROM 7075 ALUMINUM

QUALITY MANUFACTURING & MATERIALS

All of the Teknika products are precision CNC machined from aircraft quality 7075 aluminum.

.

.

.

DURABLE, CUSTOM CERAKOTE LOGO & FINISH

CERAMIC COATED IN THE COLOR OF YOUR CHOICE

Cerakote is extremely durable and protective. Each Teknika product is finshed in the color of your choice.

.

.

.

CUSTOM MADE/FINISHED TI HARDWARE

CUSTOM MACHINED TITANIUM BOLTS

We make our own Teknika titanium bolts and finish them in the color that you order. Choose from Cerakote or electrocoated.

Fully custom cranks 

Teknika cranks have been designed from the ground up to be completely custom. Select your spec and then choose from a whole list of top-of-the-line specialty finishes.

SPEC OPTIONS:  choose from 155-175mm lengths. The system uses a 3pc spindle system that works with any 30mm BB. 3pc allows you to fine tune your crank/chainring spacing for perfect chainline and crank clearance. Everything is CNC machined from 7075 aluminum and comes with titanium pinch bolts.

ALUMINUM FINISHING OPTIONS: We offer an extremely durable ceramic coating called Cerakote. It’s a very thin, hard finish and the color options are extensive. Pick from our stock colors or check out Cerakote.com and pick from hundreds of colors. You can even choose gloss or matte clear coat. Check out the custom Cerakote colors – SEE CERAKOTE COLOR SWATCHES

TITANIUM FINISHING OPTIONS: We can Cerakote your titanium hardware, or you can have it electro-coated to the color of your choice. We’re pretty stoked on this! SEE THE TITANIUM COLOR CHOICES

SPECS

  • 7075 AL / Titanium Hardware / Ceramic Finish
  • 155 / 160 / 165 / 170 / 175mm Lengths
  • 30mm Spindle / Cinch Direct Mount / 630g (160mm)

PRE-ORDER NOW FOR NOVEMBER PRODUCTION RUN

$700 ($100 deposit)

CHOOSE YOUR CUSTOM COLORS – We have 18 stock Cerakote colors or you can select PICK MY OWN COLOR and we will contact you to match any color you want. – SEE COLOR CHART

We made a small batch of BMX spiders. We are also happy to check on pricing and availability for Cinch compatible chainrings and MTB spiders.

Cerakote Ceramic Coating

Cerakote is a high-end ceramic finish that was developed for the extremely high demands firearms industry. It offers industry leading durability, hardness, and scratch resistance, as well as chemical resistance, that will protect the overall finish of your bike. Cerakote is not prone to the chipping and blistering commonly found in existing paint finishes, and is not affected by chemicals such as road oil and tar, chain lube and brake fluid.

Cerakote Vs. Anodizing

Cerakote - Cerakote does NOT detrimentally affect the fatigue properties of aluminum alloys.
Anodizing - The anodizing process creates a brittle and porous oxide layer and tensile residual stress, which detrimentally affects the fatigue properties of aluminum alloys. This fatigue has been widely reported and documented.

Stock black/silver/gold

Our standard finish is black with raw silver logos and a matte clear coat. We match this with gold hardware.

Custom color options

Customize your parts with the colors of your choice. Pick your color and match it with raw silver logos or pick your product color and your logo color. You can also choose a matte or gloss clear coat and pick from black, gold, blue, purple, or ti gray hardware. SEE COLOR CHART

Matte or gloss

We add a Cerakote® clear cloat to further protect the finish. Select a stealth matte or a gloss clear to get the perfect look.

Go nuts!

We offer a solid range of colors, but if you want something we don’t offer, let us know. Cerakote® comes in a full spectrum of colors including metallics and iridescents. We have a few custom colors to choose from or for a little more we’ll work with you to do a fully custom color of your choice. Dream big! If you want to get an idea of what’s possible, check out our friends over at Daylight - www.daylightcycles.com/finishes/

T-30 Torx fittings

By machining our own hardware, we’re able to choose the wrench interface instead of using standard heads. This enabled us to use a T-30 Torx interface on all of the key bolts in the entire line. Crank arm pinch bolts, crank spindle bolts, all stem bolts, and even the pedal spindles. The benefits of using a nearly strip-proof Torx are huge, but we realize no one wants to carry a million tools so we kept is simple!

Custom Color Chart

These are our custom color options. If you want something that we don’t have here, just let us know and we can quote you. If you want some inspiration, check out our friends at Daylight – www.daylightcycles.com/finishes/

                                       

Choose your bolt color

That’s right, all of the Teknika products come stock with titanium hardware, but you can customize yours with an assortment of electrocoated titanium finishes. You can also choose to have your bolts Cerakoted. Time to have some fun!

Teknika Development

The Teknika products (1) start with a premise and concept; either something patently different or a twist on something that hasn’t been taken as far as it can go. Then (2) we spend a lot of time working this out virtually in Shapr3D which is a fantastic industrial design program that fully integrates with Solidworks and CAD/CAM software. Once we have something we believe is a solid concept, we (3) 3D print it in carbon composite with our Markforged Mark II printer. The print isn’t quite strong enough to ride, but we can mount it to a bike and check fit and function. From there, (4) we go to CNC machined samples to ride test. Changes and iterations are done throughout the process. Once we settle on a finished design, we (5) create final samples that go through a full run of industry standard testing.

Here are some images of the development of the cranks. Click here to see a video of a carbon 3D print